From Intellivision Wiki

Revision as of 07:57, 4 December 2010 by Mr z (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Instruction NameBranch if Less Than or Equal Branch if Not Greater Than
MnemonicsBLE / BNGT
CP1610 Clock Cycles7 or 9
Opcode Range$0206, $0226

The Branch if Less Than or Equal opcode (BLE) is a two-decle opcode that is a part of the Branch family of opcodes. It is also known as Branch if Not Greater Than (BNGT). This instruction causes the CP1610 to branch if the either the Zero Flag is set or the Sign Flag is not equal to the Overflow Flag. If this condition is true, then the CP1610 branches to the address specified by the following parameters.

   Format - Decle #1    Format - Word #2 (All 16 bits are significant)
   0000:0010:00d0:0101  aaaa:aaaa:aaaa:aaaa
d indicates the direction of the branch such that: d == 0 indicates to branch in the forward direction d == 1 indicates to branch in the reverse direction
aaaaaaaaaaaaaaaa indicates the amount of offset

See the Branch opcode family documentation for more information.

Personal tools