MVO@

From Intellivision Wiki

Revision as of 20:06, 12 January 2005 by Kyle (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Instruction NameMove Out Indirect
MnemonicMVO@
CP1610 Clock Cycles9
InterruptibleNo
Opcode Range$0248-$027F7
Input FlagsNone
Output FlagsNone

The Move Out Indirect (MVO@) instruction copies the value in the specified source register to the address contained by the specified address register. Note that if the address register specified is R4-R7 (the auto-incrementing registers), then the value in the address register will be incremented by one after the value in the source register has been stored at the designated address.

   0000:0010:01aa:asss
where: sss indicates the register containing the value to move such that: sss == 000 indicates register R0 sss == 001 indicates register R1 sss == 010 indicates register R2 sss == 011 indicates register R3 sss == 100 indicates register R4 sss == 101 indicates register R5 sss == 110 indicates register R6 sss == 111 indicates register R7
aaa indicates the register containing the address such that: aaa == 000 indicates register R0 aaa == 001 indicates register R1 aaa == 010 indicates register R2 aaa == 011 indicates register R3 aaa == 100 indicates register R4 aaa == 101 indicates register R5 aaa == 110 indicates register R6 aaa == 111 indicates register R7
Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox