Difference between revisions of "Introducing the Instruction Set Part 1"
(→Observing in the Debugger: fixed typo)
m (Protected "Introducing the Instruction Set Part 1" ([edit=autoconfirmed] (indefinite) [move=autoconfirmed] (indefinite)))
|(One intermediate revision by one other user not shown)|
|Line 365:||Line 365:|
You'll notice that our value $6789 appears at location $2F2 (two words in on the top row),
You'll notice that our value $6789 appears at location $2F2 (two words in on the top row), $300, $301 and $302 (first 3 positions in the third row).
= Moving On =
= Moving On =
Latest revision as of 08:42, 4 December 2010
This tutorial focuses primarily on introducing the CP1610's instruction set. The instructions divide up into multiple categories that we will explore briefly below. You can visit the various instruction pages for details on specific instructions.
- 1 The CPU, Memory and Registers
- 2 Primary Instructions
- 3 Moving On
The CPU, Memory and Registers
The Central Processing Unit, aka. CPU, forms the brain of the system. It is connected to several memories, including the Executive ROM, Scratchpad RAM, System RAM, Graphics ROM and Graphics RAM. It's also connected to several peripherals, such as the Programmable Sound Generator (PSG) and Standard Television Interface Controller (STIC). On the inside, it has a small amount of storage for intermediate values called registers.
All of the RAMs, ROMs and peripherals are hooked to the CPU over a common interface known as the "system bus." Each of these items is assigned a range of addresses by which the CPU can refer to it. For example, the Scratch RAM is assigned addresses $0100 - $01EF. The System RAM is assigned addresses $0200 - $035F. The EXEC is assigned addresses $1000 - $1FFF. And so on. These assignments are referred to as the Memory Map.
One can think of addresses as being similar to street addresses and ZIP codes and each memory or peripheral as being similar to a city—each city gets its own range of ZIP codes that's separate from any other, and the ZIP code makes sure that mail gets to the right cities. The street address says where in the city the mail gets delivered. Addresses for accesses on the system bus work similarly: Some portion of the address uniquely identifies what item is being addressed, and the rest of the address says what to access within the item.
The CPU interacts with memory by reading and writing specific address locations in memory. The CPU does not know what it is accessing when it sends out a read or write. All it knows is the address, and whether it's reading or writing. If it's writing, it also knows the data it wishes to write. How the addressed item responds depends on the item itself.
RAMs (Random Access Memories) respond to reads by returning the contents of the addressed location. For example, if the CPU reads from location $0100, the Scratch RAM will return the contents of that location to the CPU. If the CPU writes to location $0100, the Scratch RAM will update the value stored in that location. ROMs (Read Only Memories) work similarly, except that they ignore writes. Peripherals such as the PSG and STIC modify their behavior based on what gets written to them, either generating various sounds (in the case of the PSG) or changing the display (in the case of the STIC).
Programming the CPU is primarily a process of figuring out what values need to be written where and when. ROMs typically hold the program code and fixed data. RAMs hold values that change during the game, or in case of the GRAM and BACKTAB, information displayed on the screen. Peripherals handle inputs (such as controllers) and provide outputs such as sound, voice and video.
The CPU Registers
The CPU has 8 16-bit registers. These registers act as a scratch pad, holding values for instructions to operate on. Some registers have special purposes. All of the registers can be used for general purpose computation. Here's a quick reference to what each register can be used for.
|Register||General Purpose||Shift Instructions||Indirect Pointer||Return Address|
In addition to the 8 16-bit registers, the CPU has a number of flag bits that track processor status:
|S||Sign Flag||If set, indicates that the previous operation resulted in negative value, which is determined by a one (1) in bit 15 of the result.|
|C||Carry Flag||If set, indicates that the previous operation resulted in unsigned integer overflow.|
|Z||Zero Flag||If set, indicates that the previous operation resulted in zero.|
|O||Overflow Flag||If set, indicates that the previous operation gave a signed result that is inconsistent with the signs of the source operands. (Signed overflow.)|
|I||Interrupt Enable Flag||If set, allows the INTRM line to trigger an interrupt, causing the CPU to jump to the interrupt subroutine located in the Executive ROM at $1004.|
|D||Double Byte Data Flag||If set, it causes the next instruction to read a 16-bit operand with two 8-bit memory accesses, if it supports it.|
|MVI||"MoVe In": Read a value into a register from memory|
|MVO||"MoVe Out": Write a value from a register to memory|
|ADD||Add two values together|
|SUB||Subtract two values|
|CMP||Compare two values by subtracting them|
|AND||Bitwise logical AND|
|XOR||Bitwise logical XOR|
Each instruction takes two operands. The first operand is a source operand. The second is both source and destination, except in the case of CMP, which doesn't write a result. (CMP does, however, set flags.) The primary instructions are available in 4 forms, each with a different addressing mode. The mnemonics for each form differs slightly from the others:
|Register Mode||Direct Mode||Indirect Mode||Immediate Mode|
Register Mode Instructions
Register mode instructions operate on two different registers. For instance, "ADDR R0, R1" adds the value in R0 to the value in R1, and writes the result to R1. It's equivalent to the expression "R1 = R0 + R1".
The move instructions are the simplest. "Move" is something of a misnomer, though. Move instructions really copy values from one place into another. For example, "MOVR R0, R1" copies the value in R0 to R1. After the CPU runs this instruction, both R0 and R1 will have the same value. The CPU will also set the Sign Flag and Zero Flag based on the value of the number it copied.
; Add R0 to R1, leaving the result in R1 ADDR R0, R1
; Copy the value in R2 to R3 MOVR R2, R3
; Subtracts R1 from R2 setting flags. Does not change either of R1 or R2. CMPR R1, R2
Direct Mode Instructions
MVI LIVES, R0
You'll see this technique used heavily in assembly programs of appreciable size. It makes programs easier to write, read and follow.
Indirect Mode Instructions
; Read memory pointed to by R3, ; and put the value in R0 MVI@ R3, R0
; Read memory pointed to by R2, ; and add the value to R1, leaving the result in R1 ADD@ R2, R1
; Read memory pointed to by R4, ; subtract the value from R3 writing the difference to R3. ; Then, increment R4. SUB@ R4, R3
R6 works even more specially. When reading via R6, the CPU will decrement R6 *before* using it. When writing via R6, the CPU will increment R6 *after* using it. This behavior is what makes R6 useful as a stack pointer. The instructions "PSHR" and "PULR" are just pseudonyms for MVI@ and MVO@ using R6. Thus "PSHR R0" means the same as "MVO@ R0, R6", and "PULR R0" means the same as "MVI@ R6, R0".
Immediate Mode Instructions
Immediate mode instructions operate on a constant value. "MVII #1234, R0" copies the number 1234 into R0. These are useful for adding or subtracting constants from registers, setting up values in registers and so on. Note that the instruction "MVOI" generally doesn't do anything useful. You can safely ignore it.
; Puts the value 1234 into R0 MVII #1234, R0
; Bitwise ANDs $FF with R1, leaving result in R1 ANDI #$FF, R1
Special Note: Compare Instructions
The CMP instruction bears special mention. Regardless of their addressing mode, the ADD, SUB and CMP instructions all set the flags based on the result of the computation. ADD and SUB also write the computed value back to a register. CMP works like SUB, but it doesn't write the result of the subtraction anywhere. Rather, it only sets flags. Its primary use is to control conditional branch instructions.
Program Example: ex1.asm
Lets see some of the primary instructions in action, shall we? The following example code (
ex1.asm) give a couple examples of each addressing mode on a couple instructions.
ROMW 16 ORG $5000 ;------------------------------------------------------------------------------ ; EXEC-friendly ROM header. ;------------------------------------------------------------------------------ ROMHDR: BIDECLE ZERO ; MOB picture base (points to NULL list) BIDECLE ZERO ; Process table (points to NULL list) BIDECLE MAIN ; Program start address BIDECLE ZERO ; Bkgnd picture base (points to NULL list) BIDECLE ONES ; GRAM pictures (points to NULL list) BIDECLE TITLE ; Cartridge title/date DECLE $03C0 ; Flags: No ECS title, run code after title, ; ... no clicks ZERO: DECLE $0000 ; Screen border control DECLE $0000 ; 0 = color stack, 1 = f/b mode ONES: DECLE 1, 1, 1, 1, 1 ; Color stack initialization ;------------------------------------------------------------------------------ TITLE DECLE 107, "Example 1", 0 MAIN ; Immediate mode instructions MVII #$1234, R0 ADDI #$5555, R0 ; Register mode instructions MOVR R0, R1 ADDR R0, R1 ; Direct mode instructions MVO R0, $300 MVI $300, R2 ADD $300, R2 MVII #$300, R1 MOVR R1, R5 ; Indirect mode instructions MVI@ R1, R3 MVO@ R3, R5 MVO@ R3, R5 MVO@ R3, R5 ; Stack instructions PSHR R0 ; put R0 on the stack PULR R4 ; pull the value back off into R4 here B here ; Spin forever.
Assemble this program with "
as1600 -o ex1 -l ex1.lst ex1.asm". Then take a quick peek at the symbol table in the listing file. (See the Hello World Tutorial if you need a refresher.)
00005000 ROMHDR 0000500d ZERO 0000501f MAIN 0000500f ONES 00005014 TITLE 0000502f here
Observing in the Debugger
0000 0000 0000 0000 0000 0000 0000 1000 -------- JSRD R5,$1026 0 >
0000 0000 0000 0000 0000 0000 0000 1000 -------- JSRD R5,$1026 0 > b 501F Set breakpoint at $501F > r Starting jzIntv... Hit breakpoint at $501F 0000 C0C0 0291 8007 501F 1E87 02f2 501F ------ib MVII #$1234,R0 54064 >
As you can see, R7 = $501F, which is the first instruction of MAIN. The other registers all have values in them that were set up by the EXEC. We can ignore these values for the time being. Lets single step through our 10 instructions. (Note: I have highlighted register values that change among R0 - R6 and important memory accesses for clarity.)
0000 C0C0 0291 8007 501F 1E87 02f2 501F ------i- MVII #$1234,R0 54064 > RD a=501F d=02B8 CP-1610 (PC = $501F) t=54064 RD a=5020 d=1234 CP-1610 (PC = $501F) t=54064 1234 C0C0 0291 8007 501F 1E87 02f2 5021 ------i- ADDI #$5555,R0 54072 > RD a=5021 d=02F8 CP-1610 (PC = $5021) t=54072 RD a=5022 d=5555 CP-1610 (PC = $5021) t=54072 6789 C0C0 0291 8007 501F 1E87 02f2 5023 ------i-
See how the MVII sets R0, and the ADDI changes it.
6789 C0C0 0291 8007 501F 1E87 02f2 5023 ------i- MOVR R0,R1 54080 > RD a=5023 d=0081 CP-1610 (PC = $5023) t=54080 6789 6789 0291 8007 501F 1E87 02f2 5024 ------i- ADDR R0,R1 54086 > RD a=5024 d=00C1 CP-1610 (PC = $5024) t=54086 6789 CF12 0291 8007 501F 1E87 02f2 5025 S-O---i-
6789 CF12 0291 8007 501F 1E87 02f2 5025 S-O---i- MVO R0,$0300 54092 > RD a=5025 d=0240 CP-1610 (PC = $5025) t=54092 RD a=5026 d=0300 CP-1610 (PC = $5025) t=54092 WR a=0300 d=6789 CP-1610 (PC = $5025) t=54092 6789 CF12 0291 8007 501F 1E87 02f2 5027 S-O----- MVI $0300,R2 54103 > RD a=5027 d=0282 CP-1610 (PC = $5027) t=54103 RD a=5028 d=0300 CP-1610 (PC = $5027) t=54103 RD a=0300 d=6789 CP-1610 (PC = $5027) t=54103 6789 CF12 6789 8007 501F 1E87 02f2 5029 S-O---i- ADD $0300,R2 54113 > RD a=5029 d=02C2 CP-1610 (PC = $5029) t=54113 RD a=502A d=0300 CP-1610 (PC = $5029) t=54113 RD a=0300 d=6789 CP-1610 (PC = $5029) t=54113 6789 CF12 CF12 8007 501F 1E87 02f2 502B S-O---i-
The next two instructions set us up to read and write locations around $300 with indirect accesses:
6789 CF12 CF12 8007 501F 1E87 02f2 502B S-O---i- MVII #$0300,R1 54123 > RD a=502B d=02B9 CP-1610 (PC = $502B) t=54123 RD a=502C d=0300 CP-1610 (PC = $502B) t=54123 6789 0300 CF12 8007 501F 1E87 02f2 502D S-O---i- MOVR R1,R5 54131 > RD a=502D d=008D CP-1610 (PC = $502D) t=54131 6789 0300 CF12 8007 501F 0300 02f2 502E --O---i-
6789 0300 CF12 8007 501F 0300 02f2 502E --O---i- MVI@ R1,R3 54137 > RD a=502E d=028B CP-1610 (PC = $502E) t=54137 RD a=0300 d=6789 CP-1610 (PC = $502E) t=54137 6789 0300 CF12 6789 501F 0300 02f2 502F --O---i- MVO@ R3,R5 54145 > RD a=502F d=026B CP-1610 (PC = $502F) t=54145 WR a=0300 d=6789 CP-1610 (PC = $502F) t=54145 6789 0300 CF12 6789 501F 0301 02f2 5030 --O-----
6789 0300 CF12 6789 501F 0301 02f2 5030 --O----- MVO@ R3,R5 54154 > RD a=5030 d=026B CP-1610 (PC = $5030) t=54154 WR a=0301 d=6789 CP-1610 (PC = $5030) t=54154 6789 0300 CF12 6789 501F 0302 02f2 5031 --O----- MVO@ R3,R5 54163 > RD a=5031 d=026B CP-1610 (PC = $5031) t=54163 WR a=0302 d=6789 CP-1610 (PC = $5031) t=54163 6789 0300 CF12 6789 501F 0303 02f2 5032 --O-----
As you can see, with each "MVO@ R3, R5", the CPU writes the value of R3 out to the address that R5 currently points to, and it also increments R5. So, the first write goes to $300, the next goes to $301, and the third goes to $302. At the end, R5 points to $303.
That brings us to our last two instructions, PSHR and PULR:
6789 0300 CF12 6789 501F 0303 02f2 5032 --O----- PSHR R0 54172 > RD a=5032 d=0270 CP-1610 (PC = $5032) t=54172 WR a=02F2 d=6789 CP-1610 (PC = $5032) t=54172 6789 0300 CF12 6789 501F 0303 02f3 5033 --O----- PULR R4 54181 > RD a=5033 d=02B4 CP-1610 (PC = $5033) t=54181 RD a=02F2 d=6789 CP-1610 (PC = $5033) t=54181 6789 0300 CF12 6789 6789 0303 02f2 5034 --O---i- B $5034 54192 >
The PSHR instruction writes the value of R0 ($6789) to the "top of stack", location $2F2. This is the address held in R6, the stack pointer. It also advances the stack pointer to point to location $2F3.
The PULR instruction reverses the process. First, the CPU decrements R6, and then it reads the value R6 now points to from memory into R4. Notice that we pushed from one register and pulled back into a different one. While "push" and "pull" operations need to be paired so that the stack stays consistent, nothing prevents you from pushing from one register and pulling into another.
Before you quit jzIntv, let's take a peek at memory real quick, by typing "m 2F0" and pressing enter:
> m 2F0 02F0: 5014 106C 6789 1E7D 8007 0002 0000 0007 # P..lg........... 02F8: 02D2 17D0 18F9 0000 8007 3800 5012 0228 # .-.-......8.P... 0300: 6789 6789 6789 0000 0000 0000 0000 0000 # g.g.g........... 0308: 0000 0000 0000 0000 0000 0000 0000 0000 # ................ 0310: 0000 0000 0000 0000 0000 0000 0000 0000 # ................ 0318: 0000 0000 0000 0000 0000 0000 0000 0000 # ................ 0320: 0000 0000 0000 0000 0000 0000 0000 0000 # ................ 0328: 0000 0000 0000 0000 0000 0000 0000 0000 # ................ >
You'll notice that our value $6789 appears at location $2F2 (two words in on the top row), and at locations $300, $301 and $302 (first 3 positions in the third row).
At this point, you may wish to continue with the remaining parts of this tutorial:
- Introducing the Instruction Set Part 2: Single Register and Implied Operand Instructions
- Introducing the Instruction Set Part 3: Branches, Conditional Branches and Calls
- Introducing the Instruction Set Part 4: Shift and Rotate Instructions
Or, you can return to the Programming Tutorials index.